Key Points for Chemical Storage Tanks and Installation Considerations

What are the general precautions for chemical storage tanks during use? In addition, what are the installation precautions for integrated storage tanks? These two questions are essential knowledge for us to understand chemical storage tanks and storage tanks.

1. Precautions for the use of chemical storage tanks

The specific content of the precautions for the use of chemical storage tanks will be elaborated and explained by the chemical storage tank manufacturer Huarun.

(1) In the chemical storage tank area, lighting and heating are not allowed, and there should be no open flames to avoid danger. If the medium is corrosive, necessary anti-corrosion measures should be taken.

(2) If inspecting and repairing chemical storage tanks, it is necessary to first cut off the power supply of the relevant electrical equipment to ensure the safety of the operation.

(3) After the medium inside the chemical storage tank is completely discharged, its inlet and outlet valves should be closed, or the equipment or pipelines connected to the storage tank should be isolated. If necessary, partition signs can be set up to be eye-catching.

(4) If the medium in chemical storage tanks is toxic or corrosive, it must be replaced, neutralized, and cleaned to ensure the safety of tank operations.

(5) If you are working inside a chemical storage tank, you must first obtain a work permit. Without it, you cannot enter the tank for work.

2. Installation precautions for integrated storage tanks

For integrated storage tanks, according to chemical tank manufacturers, the main installation precautions include:

For its installation environment, the installation temperature should not be too low, but should be carried out at room temperature. If the temperature is too low, installation work cannot be carried out. In addition, installation operations must be carried out in accordance with the prescribed requirements and must not be carried out in violation of regulations. In addition, after the installation of the storage tank is completed, some necessary inspections need to be carried out.

For chemical storage tanks and some precautions on storage tanks, through the professional explanation of the chemical storage tank manufacturer above, everyone can have a clear understanding and knowledge, which can be well applied in practice, so as to achieve the application of knowledge, make knowledge valuable and practical.