Vertical and horizontal storage tanks

1. Compared to chemical storage tanks, the production of plastic water tanks is much simpler. The reinforcing ribs used in water tanks are square concave, while those used in chemical storage tanks are convex, and if there are special requirements, clamps need to be added. Thickening of chemical storage tanks.

2. Plastic water tanks are mainly used for storing water, which is non corrosive and has a relatively small specific gravity. Therefore, the plastic water tank has a relatively thin wall thickness compared to the tank body, generally ranging from 5mm to 10mm, and the interface is connected by a rear screw joint, which is prone to leakage. In recent years, polyethylene water tanks have also switched to flange connections, but the welding process cannot be changed to prevent leakage of chemical liquids. Plastic water tank: Black chemical storage tank. Chemical storage tanks mainly use chemical raw materials, which have certain corrosiveness, heavy density, and high temperature. Therefore, the thickness of the tank body of chemical storage tanks should be at least 18mm. And the interface is formed by rolling molding once, and the feed port, discharge port, and liquid level port are all formed as a whole without welding, preventing interface leakage problems. All pipe connections are flange connections. The water tank has a service life of at least ten years.

3. The production process of chemical storage tanks is more complex than that of plastic water tanks, and the manufacturing requires corresponding hazardous chemical packaging container production license qualifications.