Metal surface cleaning of anti-corrosion chemical storage tank body

The cleaning operation of the metal surface of the anti-corrosion chemical storage tank body is also an important part of the tank anti-corrosion chemical operation, as it will affect the adhesion of the anti-corrosion chemical coating surface. So, standard operations should be carried out to prevent the appearance of various titles, which may affect the construction progress and thus the use of construction work. In this process, the specific approach is to first perform surface pretreatment on the data, and then spray primer. Afterwards, after the completion of the tank construction, the surface of the tank welding seam will be cleaned up and the primer will be applied. Then, apply center paint and topcoat to the entire tank body to ensure effective anti-corrosion treatment of the chemical storage tank. The anti-corrosion chemical construction of anti-corrosion chemical storage tanks should be known and grasped, in addition to the ones already mentioned earlier, including the following: the internal and external anti-corrosion chemical construction of anti-corrosion chemical storage tanks, which is not carried out after the tank pressure test is completed, followed by sandblasting and overall painting. It will also be carried out during the tank manufacturing process. So, the general steps and process are: data shot blasting treatment - coating of partial coating - welding, production, equipment, pressure testing - reprocessing - coating of subsequent paint. However, it should be noted that there may be some titles generated during the process, so we should prevent mistakes to avoid affecting the anti-corrosion chemical effect of the storage tank and the quality of the homework.